PORSCHE PANAMERA TURBO / TURBO S - 970 4.8 V8 - ( 2009 -> 2016 ) STAGE 1 PERFORMANCE SOFTWARE TUNE

Porsche Panamera Turbo / Turbo S V8 Ecu Tune

Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle response, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable and emission compliant

Stage 2 requires aftermarket parts to enhance the intake and exhaust flow capabilities of the vehicle and provide a less restrictive path. The required parts are cold air intakes, downpipes (either catless or high flow) and an upgraded exhaust system. The stage 2 tune is reconfigured to account for the improved airflow. Please email or call us for recommendation on part selection!

AVAILABLE FOR S MODELS

Features:

* RPM Limiter Increased
* Top Speed (Governor) Removal ( if Possible and available in software for removal)
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability

* Optimized for 91 Octane / 95 Ron gas
* Test drive with datalog analysis
* Emission standards are maintained

* Throttle Response Improved
* Decat (rear O2 delete) included in Stage 2

* Datalog analysis

* Software Available:
1. Stage 1 (89/91 Octane) - Requires K&N Drop in Filter
2. Stage 2 (91/93 Octane) - Requires Cold Air Intake, Catback Exhaust. - Recommended: High Flow Cats

SPEC. SHEET

Porsche Panamera Turbo / Turbo S ( 2009 -> 2013 )

Turbo ( 2009 -> 2013 )	Ori.	Stage 1	Stage 2
Power (HP)	500	590	610
Torque (lb.ft)	516	590	605
Recommended Parts: K&N Drop in filter ( for Stage 1 ) Required Parts: Cat-Back Exhaust, Cold Air Intake, Sports catalysts ( for Stage 2 )

Turbo S ( 2009 -> 2013 )	Ori.	Stage 1	Stage 2
Power (HP)	550	590	610
Torque (lb.ft)	553	590	605
Recommended Parts: K&N Drop in filter ( for Stage 1 ) Required Parts: Cat-Back Exhaust, Cold Air Intake, Sports catalysts ( for Stage 2 )

Porsche Panamera Turbo / Turbo S ( 2013 -> 2016 )

Turbo ( 2013 -> 2016 )	Ori.	Stage 1	Stage 2
Power (HP)	520	590	610
Torque (lb.ft)	516	664	679
Recommended Parts: K&N Drop in filter ( for Stage 1 ) Required Parts: Cat-Back Exhaust, Cold Air Intake, Sports catalysts ( for Stage 2 )

Turbo S ( 2013 -> 2016 )	Ori.	Stage 1	Stage 2
Power (HP)	570	590	610
Torque (lb.ft)	590	664	679
Recommended Parts: K&N Drop in filter ( for Stage 1 ) Required Parts: Cat-Back Exhaust, Cold Air Intake, Sports catalysts ( for Stage 2 )

HOW DOES IT WORK?

1. CONNECTING TO THE VEHICLE
   • Connect Powergate to your vehicle through the OBD diagnosis port with the supplied cable and wait for the bright LED strip to turn BLUE. Log in to the Powergate App by creating a ALIEN_id profile to use Alientech services.
2. BLUETOOTH PAIRING
   • Connect your smartphone to Powergate via Bluetooth. Just activate it from the icon on your phone’s settings and start searching for available devices to pair. The Powergate’s LED rail will illuminate BLUE.
3. CONNECT TO THE INTERNET
   • Connect both Powergate and your smartphone to the same internet network. If a WI-FI router is not available. You can connect Powergate to your mobile network (Hotspot).
4. CHOICE OF VEHICLE
   • Choose the brand, type of fuel and model of your vehicle from the list of vehicles in the App. Once this operation has been carried out, it is necessary to go into detail and choose the motorization. To make this easier, you can read this information on your vehicle’s registration document.
5. IDENTIFICATION
   • The tuning phase begins. Perform ECU identification. The process may last up to a few minutes during which Powergate will be illuminated in RED.
6. READING
   • Take a ECU reading. This process has a variable time duration that is independent of Powergate. Wait until the end of the operation while the LED guide will be illuminated RED.
7. WRITING
   • At the end of the read process, the control unit has connected to Powergate, and you can write the file Altered. This process has a variable time duration that is independent of Powergate. Stand by without ever unplugging the instrument. When the operation is completed, the LED guide will light up GREEN.

KEY FEATURES

• Extensive vehicle list (+ 18,000 vehicles)
• RFID quick Initialization
• Multi-level customization
• Real-time session monitoring
• Automatic File Pairing
• Cloud Platform
• Precise and accurate customization of your vehicle
• Intuitive User Experience
• Remote Configuration & Customization
• Bluetooth Connectivity & Compact design

• Increased Performance
• Improved Fuel Efficiency
• Custom ecu remapping
• Non-invasive and reversible maps
• Up to 4 customizations of your vehicle
• No PC/Laptop is Required

OBD DB25 Connection

Powergate is compatible with both OBD cables for cars and motorcycles. The OBD cable has been designed in line with the aesthetics of the device to ensure a seamless and pleasant user experience.

Powergate App

The Powergate app is compatible with the most widely used smartphone operating systems: iOS, Android, and EMUI, offering an intuitive tuning experience through vehicle performance customization. Once paired with the smartphone, it allows access to modified files on the Cloud.Furthermore, it’s possible to customize its skin: an effective tool for the Powergate Manager to create a distinctive visual identity, transcending geographical boundaries and differentiating from the competition.