PORSCHE MACAN GTS 3.0 V6 (2021 -> 2023) - 440hp - STAGE 1 PERFORMANCE SOFTWARE TUNE

Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle response, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable and emission compliant

Stage 2 requires aftermarket parts to enhance the intake and exhaust flow capabilities of the vehicle and provide a less restrictive path. The required parts are cold air intakes, downpipes (either catless or high flow) and an upgraded exhaust system. The stage 2 tune is reconfigured to account for the improved airflow. Please email or call us for recommendation on part selection!

Chiptuning gearbox software makes it possible to exploit the full potential of your vehicle and to benefit from an optimal driving experience.

Features:

* RPM Limiter Increased
* Top Speed (Governor) Removal ( if Possible and available in software for removal)
* Improved Fuel Efficiency
* ECU individually reprogrammed

* Optimized Responsiveness and Drivability

* Optimized for 91 Octane / 95 Ron gas
* Test drive with datalog analysis
* Emission standards are maintained

* Throttle Response Improved

* Datalog analysis

* Software Available:

1. Stage 1 (89/91 Octane) - Requires K&N Drop in Filter

2. Stage 2 (91/93 Octane or Higher ) - Requires Cat-Back Exhaust, Cold Air Intake. - Recommended: Sports catalysts

Gearbox / Transmission Tune

7 Speed PDK - TCU Tune

Stage 1 - 7-speed PDK ( Temic DL501 Gen2 ) Transmission Software

Recommended: Stage 1 & Stage 2 ECU Tune

Faster shift speed, Increased RPM Limit matched to ECU Tune, Increased line pressure, Increased hold pressure, Increased clutch clamping,

Stage 2 - 7-speed PDK ( Temic DL501 Gen2 ) Transmission Software

Recommended: Stage 2 ECU Tune

SPEC. SHEET

Macan GTS	Ori.	Stage 1	Stage 2
Power (HP)	440	500	520
Torque (lb.ft)	405	516	536
Recommended Parts: K&N Drop in filter ( for Stage 1 ) Sports catalysts ( for Stage 2 ) Required Parts: Cat-Back Exhaust, Cold Air Intake ( for Stage 2 )

Programming Instructions
PWG 4 Tuning Tool - No PC Required ( Works with Phone App and Powergate Flashing Device - "NO TUNE INCLUDED IN TOOL" cost of tool is separate to tune ( TCU ONLY )	NO For ECU YE S For TCU
REMOTE TUNINGOBD2 CABLE + BBS FLASHING SOFTWARE ( includes 1 year subscription)Direct ECU Connection Cable for 2019 -> Present ( ECU TAG : Bosch - MG1CS002 )	YES for ECU
OBD Port Tuning (Vehicle Tuned via OBD port without ECU Removal) at AMT Tuning Ltd	YES for ECU YES For TCU
ECU CAN BE SENT TO AMT TUNING TO BE FLASHED ( Please email: sales@amttuning.com for details regarding ecu removal and shipping )	YES for ECU YES For TCU

FLASHING TOOL

*** OBD2 CABLE & FLASHING SOFTWARE (1 Year Subscription Included)****

**** REQUIRES WINDOWS LAPTOP WITH INTERNET CONNECTION *****

Features

• Direct connection to the vehicle through OBD port
• the ECU can be restored to factory settings at any time
• Safe to use and user-friendly
• Independently able to select and upload your map to your vehicle
• Standard connection to PC via USB port to configure the tools (cables included).
• Reads possible errors with DTC code, enabling you to erase them
• Ability to tune other vehicles with same tool ( PLEASE NOTE: NEW TUNE MUST be purchased separately for each other vehicle )

*************************************************************************************

2019 -> Present - Direct ECU Connection Cable

Direct ECU Connection Cable for 2019 -> Present with ECU TAG : Bosch - MG1CS002

ECU can ONLY be tuned directly at the ECU so it require the Direct Cable Connection Cable for it to get flashed.

HOW DOES IT WORK?

1. CONNECTING TO THE VEHICLE
   • Connect Powergate to your vehicle through the OBD diagnosis port with the supplied cable and wait for the bright LED strip to turn BLUE. Log in to the Powergate App by creating a ALIEN_id profile to use Alientech services.
2. BLUETOOTH PAIRING
   • Connect your smartphone to Powergate via Bluetooth. Just activate it from the icon on your phone’s settings and start searching for available devices to pair. The Powergate’s LED rail will illuminate BLUE.
3. CONNECT TO THE INTERNET
   • Connect both Powergate and your smartphone to the same internet network. If a WI-FI router is not available. You can connect Powergate to your mobile network (Hotspot).
4. CHOICE OF VEHICLE
   • Choose the brand, type of fuel and model of your vehicle from the list of vehicles in the App. Once this operation has been carried out, it is necessary to go into detail and choose the motorization. To make this easier, you can read this information on your vehicle’s registration document.
5. IDENTIFICATION
   • The tuning phase begins. Perform ECU identification. The process may last up to a few minutes during which Powergate will be illuminated in RED.
6. READING
   • Take a ECU reading. This process has a variable time duration that is independent of Powergate. Wait until the end of the operation while the LED guide will be illuminated RED.
7. WRITING
   • At the end of the read process, the control unit has connected to Powergate, and you can write the file Altered. This process has a variable time duration that is independent of Powergate. Stand by without ever unplugging the instrument. When the operation is completed, the LED guide will light up GREEN.

KEY FEATURES

• Extensive vehicle list (+ 18,000 vehicles)
• RFID quick Initialization
• Multi-level customization
• Real-time session monitoring
• Automatic File Pairing
• Cloud Platform
• Precise and accurate customization of your vehicle
• Intuitive User Experience
• Remote Configuration & Customization
• Bluetooth Connectivity & Compact design

• Increased Performance
• Improved Fuel Efficiency
• Custom ecu remapping
• Non-invasive and reversible maps
• Up to 4 customizations of your vehicle
• No PC/Laptop is Required

OBD DB25 Connection

Powergate is compatible with both OBD cables for cars and motorcycles. The OBD cable has been designed in line with the aesthetics of the device to ensure a seamless and pleasant user experience.

Powergate App

The Powergate app is compatible with the most widely used smartphone operating systems: iOS, Android, and EMUI, offering an intuitive tuning experience through vehicle performance customization. Once paired with the smartphone, it allows access to modified files on the Cloud.Furthermore, it’s possible to customize its skin: an effective tool for the Powergate Manager to create a distinctive visual identity, transcending geographical boundaries and differentiating from the competition.

Purple-Wi-Fi Module update