Porsche Cayenne Turbo GT 4.0TT (E3.2) 2023+
Stage 1 & Stage 2 Performance ECU Software
Unlock the full potential of the Porsche Cayenne Turbo GT 4.0 TFSI V8. AMT Tuning’s ECU software delivers supercar-level performance with OEM-like refinement, drivability, and safety. Developed on the EA825 platform with extensive data logging and real-world testing, this calibration offers huge gains with long-term reliability in mind.
Vehicle Application / Specs
- Model: Porsche Cayenne Turbo GT (Coupé)
- Platform: E3.2
- Engine: 4.0L V8 twin-turbo (EA825)
- Drivetrain: AWD
- Production Years: 2023+
- Fuel: Premium gasoline (91+ AKI / 95+ RON recommended)
Power & Torque Gains* (Crank – Approximate)
| Calibration | Fuel | Power | Torque |
|---|---|---|---|
| Stock | – | ~650 hp | ~626 lb-ft |
| Stage 1 | 91–93 AKI (95–98 RON) | up to ~760 hp | up to ~830 lb-ft |
| Stage 2 | 93+ AKI / E-blend + bolt-ons | up to ~780+ hp | up to ~850+ lb-ft |
*Actual results depend on fuel quality, hardware, dyno type, and conditions.
Key Features
- ECU individually reprogrammed for the EA825 4.0TT
- Massive gains in power and torque across the rev range
- Improved throttle response and linear pedal mapping
- Top speed limiter removal (where supported)
- Raised RPM limiter within safe limits
- Optimized fuel, boost, and ignition with full knock control
- Factory safety routines retained and refined (EGT, knock, boost, thermal)
- Supports bolt-on hardware without sacrificing reliability
- Optional exhaust crackle / burbles or OEM-quiet configuration
- Datalog analysis available for in-house flashes
Software Options
Stage 1 – Stock Hardware / Mild Bolt-Ons
- For stock vehicles or cars with panel filter / intake and cat-back exhaust
- Available calibrations (example fuels, may vary by region):
- 91 AKI (95 RON)
- 93 AKI (98 RON)
- 100+ AKI race fuel
- Focus:
- Strong gains on pump fuel
- Smooth, OEM-like drivability
- Emissions-conscious (factory primary catalysts and OBD monitoring retained)
Stage 2 – Full Bolt-On (Track / Off-Road Use)
- Intended for intake + exhaust + high-flow downpipes / sports cats
- Recalibrated for higher flow and lower backpressure
- Stronger mid-range and top-end with suitable hardware
- Rear O2 / efficiency strategies available for off-road / motorsport use only
- Recommended only where local regulations allow non-OEM exhaust/catalyst configurations
Note: Stage 2 and any configuration affecting catalyst efficiency are for track / off-road use where permitted. Customer is responsible for compliance with local laws.
Hardware Requirements & Recommendations
Stage 1
- No hardware required
- Recommended: High-flow panel filter or intake; optional cat-back exhaust
Stage 2
- Required:
- Quality cold air intake / upgraded airbox
- Performance cat-back exhaust
- High-flow downpipes / sports catalysts or performance catted solutions
- Recommended:
- Upgraded intercoolers
- High-flow charge and inlet pipes
Calibration Strategy & Safety
- Torque & Boost Control
- Reworked torque model for accurate ECU–TCU interaction
- Boost and turbo speed kept within safe operating limits
- Fueling & Knock Control
- Rich, safe AFR under high load
- Full OEM knock control strategies active and recalibrated
- Thermal Management
- Protection against excessive EGT, coolant, and oil temperature
- Power reduction logic retained for component protection
- Driveline Protection
- Torque delivery shaped to reduce shock loads while maximizing acceleration
Tuning Method / How It Works
Option 1 – In-House OBD2 Flash (AMT Tuning, Toronto)
- Book an appointment and bring the vehicle to AMT Tuning.
- We perform a system scan and ECU read via the OBD port.
- AMT uploads and programs the selected Stage 1 or Stage 2 file.
- Road test with datalog analysis and final checks.
Typical time required: 4–6 hours.
Option 2 – ECU Mail-In Service
- Customer removes the ECU and ships it to AMT Tuning.
- We bench-program the ECU using professional tooling.
- ECU is re-sealed, tested, and shipped back.
For ECU removal guidance, shipping instructions and current lead times, please email:
sales@amttuning.com
Ordering Information
At checkout, please provide:
- VIN
- Model year
- Current hardware (intake, downpipes, exhaust, intercoolers, etc.)
- Preferred stage (Stage 1 or Stage 2) and fuel type
If you are unsure which stage or fuel map is right for your use (daily, spirited road, track), contact us and we will recommend the best calibration and hardware combination for your Cayenne Turbo GT.
