Address
6 - 25 Edilcan Drv, Concord, Ontario L4K 3S4
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed

AMT TUNING LTD
Expert Tuning Services for Optimal Performance
Experience the thrill of enhanced performance with AMT Tuning
Enhanced Speed - Unleash Power - Ultimate Performance
Includes OBD2 Flashing Cable + Flashing Software + ECU Tune
AMT Tuning performance software for the 2009–2010 Toyota Corolla 2.4L 2AZ-FE improves throttle response, engine responsiveness and overall drivability while optimizing the ECU calibration for the selected hardware and fuel grade.
The included OBD2 flashing cable and software allow the ECU to be read and programmed through the vehicle's diagnostic port using a Windows laptop.
Designed for vehicles with stock or lightly modified hardware.
Recommended hardware:
Fuel:
Stage 1 calibration with optional exhaust overrun / crackle feature.
Recommended hardware:
Pops & Bangs may increase exhaust-system and catalytic-converter temperatures and are recommended only for suitable exhaust configurations.
Designed for vehicles with increased intake and exhaust flow.
Required / recommended hardware:
Stage 2 includes calibration changes to suit the additional airflow and exhaust modifications.
Rear O2 / Decat Software is included with Stage 2 at no additional charge when required for the vehicle's exhaust configuration.
Stage 2 calibration with optional exhaust overrun / crackle feature.
Designed for more extensively modified naturally aspirated setups.
Recommended hardware:
Stage 2+ receives additional calibration changes based on the complete vehicle setup and supplied modification information.
Rear O2 / Decat Software is included with Stage 2+ at no additional charge when required for the vehicle's exhaust configuration.
Stage 2+ calibration with optional exhaust overrun / crackle feature.
Availability of individual software features can depend on the ECU software version.
Rear O2 / Decat Software is included at no additional charge with Stage 2 and Stage 2+.
| Specification | Original | Stage 1 | Stage 2 |
|---|---|---|---|
| Power | 158 HP | 173 HP | 189 HP |
| Torque | 162 lb-ft | 172 lb-ft | 186 lb-ft |
Performance figures are estimates and can vary depending on fuel quality, vehicle condition, hardware and environmental conditions.
Vehicle: Toyota Corolla
Model Years: 2009–2010
Engine: 2.4L 2AZ-FE
Original Power: 158 HP
ECU Manufacturer: Denso
Supported ECU Family: 76F00xx
Programming Method: OBD
Transmission: Manual and Automatic supported where applicable
The package includes:
Requirements:
The flashing system allows the customer to read and program the ECU through the vehicle's OBD diagnostic port without removing the ECU.
The vehicle must be mechanically sound before tuning.
ECU software will not repair an existing fuel-delivery, ignition, mechanical, exhaust, sensor or other hardware problem.
The customer is responsible for using the correct fuel grade and hardware configuration for the selected tune.
Actual performance results vary depending on vehicle condition, fuel quality, installed modifications and environmental conditions.
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed