Stage 2 also consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle response, torque limiters etc...) are customly adjusted. All engine parameter values will be adapted to accommodate additional modifications done to the vehicle including after market sports exhaust, headers, both catless and high flow cat. applications & upgraded cold air intake.

AVAILABLE FOR BOTH MANUAL & CVT TRANSMISSION / SEDAN & HACHBACK

Features:
* Throttle Response Improved
* Decat (rear O2 delete) included in Stage 2
* Rev Hang Improved
* RPM Limiter @ 7000rpm Stage 1 ( Currently for 6 speed manual only )
* RPM Limiter @ 7200rpm Stage 2 ( Currently for 6 speed manual only )
* RPM Limiter @ 7300rpm Stage 2++ ( Currently for 6 speed manual only )
* Optimized for 91- 93 Octane
* Top Speed (Governor) Removal ( if Possible and available in software for removal, NOT A GUARANTEED SOLUTION also written request required)
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability
* Datalog analysis
* EGR Delete Software - ( For GGP EGR Delete KIT )

BUY EGR DELETE KIT DIRECTLY FROM GGP ( Link: E210 Corolla EGR Delete (Half & Full) — Grocery Getter Performance )

STORE:GGP Performance Products - e210 Corolla 2.0 — Shop — Grocery Getter Performance

* Software Available:
1. Stage 1 (89/91 Octane) - Requires K&N Drop in Filter
2. Stage 1 with Pops & Bangs (89/91 Octane) - Requires K&N Drop in Filter & Catback Exhaust

3. Stage 2 (91/93 Octane) - Requires Cold Air Intake & Catback Exhaust
4. Stage 2 with Pops & Bangs (91/93 Octane) - Requires Cold Air Intake & Catback Exhaust

5. Stage 2+ (91/93 Octane) - Requires Cold Air Intake, Catback Exhaust optimized 2J Headers
6. Stage 2+ with Pops & Bangs (91/93 Octane) - Requires Cold Air Intake, Catback Exhaust optimized 2J Headers

7. Stage 2++ (91/93 Octane) more aggressive tune, more power & torque better throttle response - Requires Cold Air Intake, Catback Exhaust optimized for 2J Headers
8. Stage 2++ with Pops & Bangs (91/93 Octane) more aggressive tune, more power & torque better throttle response - Requires Cold Air Intake, Catback Exhaust optimized for 2J Headers

	Ori.	Stage 1	Stage2
Power (HP)	168	186	200
Torque (lb.ft)	155	170	186
Recommended Parts: Headers (for Stage 2) Required Parts: Cat-Back Exhaust , Cold Air Intake (for Stage 2)

HOW DOES IT WORK?

1. CONNECTING TO THE VEHICLE
   • Connect Powergate to your vehicle through the OBD diagnosis port with the supplied cable and wait for the bright LED strip to turn BLUE. Log in to the Powergate App by creating a ALIEN_id profile to use Alientech services.
2. BLUETOOTH PAIRING
   • Connect your smartphone to Powergate via Bluetooth. Just activate it from the icon on your phone’s settings and start searching for available devices to pair. The Powergate’s LED rail will illuminate BLUE.
3. CONNECT TO THE INTERNET
   • Connect both Powergate and your smartphone to the same internet network. If a WI-FI router is not available. You can connect Powergate to your mobile network (Hotspot).
4. CHOICE OF VEHICLE
   • Choose the brand, type of fuel and model of your vehicle from the list of vehicles in the App. Once this operation has been carried out, it is necessary to go into detail and choose the motorization. To make this easier, you can read this information on your vehicle’s registration document.
5. IDENTIFICATION
   • The tuning phase begins. Perform ECU identification. The process may last up to a few minutes during which Powergate will be illuminated in RED.
6. READING
   • Take a ECU reading. This process has a variable time duration that is independent of Powergate. Wait until the end of the operation while the LED guide will be illuminated RED.
7. WRITING
   • At the end of the read process, the control unit has connected to Powergate, and you can write the file Altered. This process has a variable time duration that is independent of Powergate. Stand by without ever unplugging the instrument. When the operation is completed, the LED guide will light up GREEN.

KEY FEATURES

• Extensive vehicle list (+ 18,000 vehicles)
• RFID quick Initialization
• Multi-level customization
• Real-time session monitoring
• Automatic File Pairing
• Cloud Platform
• Precise and accurate customization of your vehicle
• Intuitive User Experience
• Remote Configuration & Customization
• Bluetooth Connectivity & Compact design

• Increased Performance
• Improved Fuel Efficiency
• Custom ecu remapping
• Non-invasive and reversible maps
• Up to 4 customizations of your vehicle
• No PC/Laptop is Required

OBD DB25 Connection

Powergate is compatible with both OBD cables for cars and motorcycles. The OBD cable has been designed in line with the aesthetics of the device to ensure a seamless and pleasant user experience.

Powergate App

The Powergate app is compatible with the most widely used smartphone operating systems: iOS, Android, and EMUI, offering an intuitive tuning experience through vehicle performance customization. Once paired with the smartphone, it allows access to modified files on the Cloud.Furthermore, it’s possible to customize its skin: an effective tool for the Powergate Manager to create a distinctive visual identity, transcending geographical boundaries and differentiating from the competition.