MERCEDES BENZ CLA45 AMG C117 2.0T (2019+) STAGE 1 PERFORMANCE SOFTWARE TUNE

Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle responce, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable, this is the way the vehicle should have been from factory!

Features:

* RPM Limiter Increased
* Top Speed (Governor) Removal ( if Possible and available in software for removal)
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability

* Optimized for 91 Octane / 95 Ron gas
* Test drive with datalog analysis
* Emission standards are maintained

* Throttle Response Improved
* Decat (rear O2 delete) included in Stage 2

* Datalog analysis

* Software Available:

1. Stage 1 - Recommended: BMC Air Filter
2. Stage 1 with Pops & Bangs Recommended: BMC Air Filter & Catback Exhaust
3. Stage 2 -> Requires: Exhaust with sport cat - BMC Air filter
4. Stage 2 with Pops & Bangs (91/93 Octane) - Requires: Exhaust with sport cat - BMC Air filter

SPEC. SHEET

	Ori.	Stage 1	Stage 2
Power (HP)	381	420	440
Torque (lb.ft)	350	398	415
Recommended Parts: BMC Air filter Required Parts: Exhaust with Sport Catalyst - BMC Air filter (for Stage 2)

Production Date	2011 -> 2014
Engine	2.0T
ECU Make	BOSCH
ECU Type	MED17.7.2
ECU Type	Bench Flash
Time Required	3-4hrs

Programming Instructions
AMTFlasher3+ (Personal Flashing tool, car flashed via OBD port - "NO TUNE INCLUDED IN TOOL" cost of tool is separate to tune)	YES
OBD Port Tuning (Vehicle Tuned via OBD port without ECU Removal) ONLY at AMT Tuning Ltd	YES
ECU CAN BE SENT TO AMT TUNING TO BE FLASHED ( Please email: sales@amttuning.com for details regarding ecu removal and shipping )	YES

AMTFlasher3+ Personal OBD Programmer is the portable and touchscreen Personal OBD Programmer which will allow you to program the ECUs of your vehicle in complete autonomy, using your preloaded modified maps.

Features

• Direct connection to the vehicle through OBD port
• the ECU can be restored to factory settings at any time
• AMTFlasher3+ is safe to use and user-friendly
• Independently able to select and upload your map to your vehicle
• Standard connection to PC via USB port to configure the tools (cables included).
• AMTFlasher3+ OBD Programmerreads possible errors with DTC code, enabling you to erase them