Address
6 - 25 Edilcan Drv, Concord, Ontario L4K 3S4
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed

AMT TUNING LTD
Expert Tuning Services for Optimal Performance
Experience the thrill of enhanced performance with AMT Tuning
Enhanced Speed - Unleash Power - Ultimate Performance
MERCEDES-BENZ W177 - A220 (05/2018-2022) - 190hp -M260 - STAGE 1 PERFORMANCE SOFTWARE TUNE
Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle responce, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable, this is the way the vehicle should have been from factory!
Stage 2 requires aftermarket parts to enhance the intake and exhaust flow capabilities of the vehicle and provide a less restrictive path. The required parts are cold air intakes, downpipes (either catless or high flow) and an upgraded exhaust system. The stage 2 tune is reconfigured to account for the improved airflow. Please email or call us for recommendation on part selection!
Features:
* RPM Limiter Increased
* Top Speed (Governor) Removal ( if Possible and available in software for removal)
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability
* Optimized for 91 Octane / 95 Ron gas
* Test drive with datalog analysis
* Emission standards are maintained
* Throttle Response Improved
* Datalog analysis
SPEC. SHEET
Mercedes Benz A220 (05/2018-2022) Ori. Stage 1 Stage 2 Stage 3 Power (HP) 190 250 272 / Torque (lb.ft) 258 296 315 / Recommended Parts:
Stage 1 - BMC Air Filters
Required Parts:
Stage 2 - Downpipes with Sports Catalytic Convertor
| Production Date | 2015 -> 2018 |
| Engine | M260 DE20AL |
| ECU Make | Bosch
|
| ECU Type | MED17.7.7
|
| ECU Type | Bench Flash & Kessa
|
| Time Required | 3-4hrs |
| Programming OPTIONS | |
|
NO |
| OBD Port Tuning
(Vehicle Tuned via OBD port without ECU Removal) ONLY at AMT Tuning Ltd |
opt1 |
| ECU CAN BE SENT
TO AMT TUNING TO BE FLASHED ( Please email: sales@amttuning.com for details regarding ecu removal and shipping ) |
opt2 |
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed