HYUNDAI GENESIS COUPE 2.0L TURBO - Performance Tune

*** STAGE 1 + OBD2 CABLE & FLASHING SOFTWARE COMBO (1 Year Subscription Included)**** Software included Stage 1 tune

**** REQUIRES WINDOWS LAPTOP WITH INTERNET CONNECTION *****

Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle response, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable and emission compliant

Stage 2 requires aftermarket parts to enhance the intake and exhaust flow capabilities of the vehicle and provide a less restrictive path. The required parts are cold air intakes, headers (either catless or high flow) and an upgraded exhaust system. The stage 2 tune is reconfigured to account for the improved airflow. Please email or call us for recommendation on part selection!

AVAILABLE FOR BOTH MANUAL & CVT TRANSMISSION / SEDAN & HACHBACK

Features:
* Throttle Response Improved
* increased RPM Limiter
* Optimized for 91 /93 Octane
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability
* Datalog analysis
* Free Future Software Updates
* Software included
1. Stage 1

AVAILABLE TUNES

* STAGE 1 TUNE
* STAGE 1 + POPS & BANGS TUNE
* STAGE 2 TUNE
* STAGE 2 + POPS & BANGS TUNE

Genesis Coupe BK1 (2010-2012)	Original	Stage 1	Stage2
Power (HP)	210	240	260
Torque (lb.ft)	220	273	295
Recommended Parts: Downpipe (for Stage 2) Required Parts: Downpipe, Cat-Back Exhaust , Cold Air Intake (for Stage 2)

Genesis Coupe BK2 (2013-2015)	Original	Stage 1	Stage2
Power (HP)	271	310	340
Torque (lb.ft)	275	331	350
Recommended Parts: downpipe (for Stage 2) Required Parts: Downpipe, Cat-Back Exhaust , Cold Air Intake (for Stage 2)

Production Date	2010 -> 2015
Engine	2.0T
ECU Make	Siemens VDO
ECU Type	SIM2K-141 / SIM2K-141.1
ECU Type	OBD / Bench
Time Required	3-4hrs

Programming Instructions
OBD2 Cable with BB S Flashing software (requires windows Laptop with internet connection for flashing ) Flashing Software comes with 1 year Subscription Included	YES
Send ECU to AMT Tuning	YES

OBD2 Cable and Flashing Software (Requires Windows Laptop with Internet Connection) is a Compatible OBD 2 cable with Supporting Software with 1 year Subscription Included which allows you to Read and Program the vehicles ECUs

Features

• Direct connection to the vehicle through OBD port
• the ECU can be restored to factory settings at any time
• Safe to use and user-friendly
• Independently able to select and upload your map to your vehicle
• Standard connection to PC via USB port to configure the tools (cables included).
• Reads possible errors with DTC code, enabling you to erase them
• Ability to tune other vehicles with same tool ( PLEASE NOTE: NEW TUNE MUST be purchased separately for each other vehicle )