FERRARI F430 (2004 – 2009) 4.3 L V8 – STAGE 1 & STAGE 2 PERFORMANCE TUNE

ECU BOSCH ME7.3 – BENCH FLASH SERVICE

SKU: AMT.FER.430.STG2

Performance Gains

Required & Recommended Parts

Replacement Air Filter: BMC FB129/03 – Made in Italy (One filter per box)

Overview

The Ferrari F430 Stage 1 and Stage 2 calibrations by AMT Tuning enhance the performance and responsiveness of the legendary 4.3 L V8, offering refined throttle precision, improved torque delivery, and a sharper overall powerband.

Each ECU is individually reprogrammed through bench flashing of the Bosch ME7.3 dual-ECU system, ensuring perfect synchronization between left and right banks. Adjustments are made to ignition timing, fueling, torque limiters, and throttle control, all optimized for 91 Octane / 95 RON fuel.

The Stage 2 calibration further refines exhaust gas dynamics, supporting upgraded sports exhaust systems, high-flow catalytic converters, catless headers, and cold-air intakes for maximum flow and power gains.

Key Features

• Rear O2 Delete (DECAT) for catless header applications
• Optimized for 91 Octane / 95 RON fuel
• Improved throttle response and drivability
• Enhanced fuel efficiency and mid-range torque
• ECU individually reprogrammed on bench
• Optional Pops & Bangs add-on available
• Optional datalog review and test drive for in-house sessions

Vehicle Specifications

Programming Instructions

• Both ECUs must be sent to AMT Tuning for bench reprogramming.
• ECU flashing is performed only on the bench, not via OBD.
• Not available through Powergate or handheld flashing tools.
• For ECU removal and shipping details, see below or email sales@amttuning.com .

---

ECU Removal Instructions

1. Turn the battery disconnect knob (in the front trunk) to the OFF position.
2. Locate the ECUs inside the cabin behind the driver’s seat (left side).
3. Remove the left carpet covers behind the seat to access the ECU compartment.
4. Remove the 10 mm bolts securing the ECU brackets to the frame.
5. Release the connectors by pressing the locking clip and lifting the lever upward.
6. Clearly mark each ECU as LEFT / RIGHT or FRONT / REAR before shipping.
7. Reinstall in reverse order after service completion, ensuring all fasteners are secured before reconnecting battery power.

Shipping Instructions

Please pack both ECUs securely using bubble wrap and a sturdy box with tracking and insurance.

Shipping Address:
AMT Tuning Ltd
6-25 Edilcan Drive
Concord, Ontario L4K 3S4 Canada

Phone: +1 877 469 9440
Email: sales@amttuning.com