FERRARI 488 GTB / SPIDER / PISTA (2016–PRESENT) – STAGE 1 & STAGE 2 PERFORMANCE TUNE

3.9L V8 TWIN-TURBO – BOSCH MED17.3.5 – BENCH FLASH SERVICE

SKU: AMT.FER.488.STG2

Performance Gains

Required & Recommended Parts

Overview

The Ferrari 488 GTB, Spider, and Pista models are equipped with Ferrari’s revolutionary 3.9L twin-turbocharged V8, one of the most celebrated engines ever produced. AMT Tuning’s Stage 1 and Stage 2 software calibrations elevate this masterpiece to entirely new levels of performance and precision.

Our calibrations focus on optimized turbo control, ignition advance, fuel delivery, and torque management, unlocking a massive increase in power and responsiveness. With our Stage 2 configuration, power reaches up to 800 HP and 665 lb-ft of torque, delivering blistering acceleration from 0–100 km/h in as little as 2.7 seconds and a top speed of over 345 km/h.

Key Features

• Individually recalibrated ECU using Bosch MED17.3.5 bench flash
• Optimized boost and torque management for smoother, linear acceleration
• Rear O2 Delete (DECAT) for catless header or downpipe setups
• Enhanced throttle mapping and turbo response
• Optimized for 91 / 95 RON fuel
• Improved fuel efficiency and drive refinement
• Datalogging and post-tune analysis available

Vehicle Specifications

Programming Instructions

• Both ECUs must be sent to AMT Tuning for reprogramming.
• ECU tuning is performed via bench flash only, not through OBD.
• Not compatible with Powergate or other handheld flashing tools.
• For removal and shipping details, contact sales@amttuning.com .

Note: OBD tuning is available only for in-house sessions at AMT Tuning Ltd.

ECU Removal Instructions

1. Disconnect the battery before beginning any ECU removal.
2. Locate the ECU right side wheel fender.
3. Remove remove wheel and liner and release the ECU mounting bolts.
4. Unplug the ECU connectors carefully by releasing the lock tabs.
5. Reinstall in reverse order once returned. Verify all connectors are secure before powering up.

Shipping Instructions

Please pack both ECUs securely using anti-static material or bubble wrap. Ship in a padded box with tracking and insurance.

Shipping Address:
AMT Tuning Ltd
6-25 Edilcan Drive
Concord, Ontario L4K 3S4 Canada

Phone: +1 877 469 9440
Email: sales@amttuning.com