Address
6 - 25 Edilcan Drv, Concord, Ontario L4K 3S4
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed

AMT TUNING LTD
Expert Tuning Services for Optimal Performance
Experience the thrill of enhanced performance with AMT Tuning
Enhanced Speed - Unleash Power - Ultimate Performance
BMW 320i / 330i F-Series — B48 2.0L Turbo - Stage 1 Performance Software Tune | 2016–2020
AMT Tuning offers custom ECU calibration for supported BMW F-Series models equipped with the 2.0L B48 turbocharged engine.
Our Stage 1 software is designed to improve throttle response, acceleration, torque delivery and overall drivability while retaining the vehicle's original hardware configuration.
BMW M4 Stage 2 Tune with P&B in sports + Mode By AMT Tuning
Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle responce, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable, this is the way the vehicle should have been from factory!
Features:
* Rev Hang Improved (Manual Transmission)
* RPM Limiter Increased
* Top Speed (Governor) Removal ( if Possible and available in software for removal)
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability
* Optimized for 91 Octane / 95 Ron gas
* Test drive with datalog analysis
* Emission standards are maintained
* Throttle Response Improved
* Decat (rear O2 delete) included in Stage 2
* Datalog analysis
SPEC. SHEET
BMW 320i / 320i xDrive ( 2016 - 2020 ) - B48 Ori. Stage 1 Stage 2 Power (HP) 181 260 280 Torque (lb.ft) 199 310 325 Recommended Parts:
Stage 1 - K&N Panel Filter
Stage 2 - Downpipe with Sports Catalytic Convertor , Cat-Back Exhaust , Cold Air Intake , Front mount Intercooler
Required Parts:
Cat-Back Exhaust , Cold Air Intake (for Stage 2)
BMW 328i / 328i xDrive ( 2016 - 2020 ) - B48 Ori. Stage 1 Stage 2 Power (HP) 241 280 300 Torque (lb.ft) 258 317 332 Recommended Parts:
Stage 1 - K&N Panel Filter
Stage 2 - Downpipe with Sports Catalytic Convertor , Cat-Back Exhaust , Cold Air Intake , Front mount Intercooler
Required Parts:
Cat-Back Exhaust , Cold Air Intake (for Stage 2)
BMW 330i / 330i xDrive ( 2016 - 2020 ) - B48 Ori. Stage 1 Stage 2 Power (HP) 248 400 420 Torque (lb.ft) 258 427 457 Recommended Parts:
Stage 1 - K&N Panel Filter
Stage 2 - Downpipe with Sports Catalytic Convertor , Cat-Back Exhaust , Cold Air Intake , Front mount Intercooler
Required Parts:Cat-Back Exhaust , Cold Air Intake (for Stage 2)
| Production Date | 2016 -> 2020 |
| Engine | 2.0L Turbo B48 |
| ECU Make | Bosch
|
| ECU Type | MG1CS003 |
| ECU Type | OBD or Bench Flash
|
| Time Required | 3-4hrs |
| Programming Instructions | |
|
NO |
| OBD Port Tuning
(Vehicle Tuned via OBD port without ECU Removal) ONLY at AMT Tuning Ltd |
YES |
| ECU CAN BE SENT
TO AMT TUNING TO BE FLASHED ( Please email: sales@amttuning.com for details regarding ecu removal and shipping ) |
YES |
For this application, remote OBD flashing is not currently available through AMT Tuning.
The engine ECU must be removed from the vehicle and shipped to AMT Tuning in Canada for programming.
No Powergate device or additional OBD flashing tool is required.
Step 1 — Place Your Order
Select your vehicle model, production year, transmission and desired tuning options. Provide your VIN and details of any engine modifications.
Step 2 — Remove the Engine ECU
Have the engine ECU removed by a qualified automotive technician familiar with BMW electronic systems.
The technician should follow the appropriate BMW service procedure, safely isolate the electrical system and disconnect the ECU without damaging its connectors or wiring.
Do not attempt to open the ECU housing.
Step 3 — Ship the ECU to AMT
Securely package the ECU in an antistatic protective bag with sufficient cushioning inside a sturdy shipping box.
Include your name, order number, contact information and vehicle VIN.
Ship the ECU using a tracked courier service to:
AMT Tuning Ltd.
6–25 Edilcan Drive
Concord, Ontario L4K 3S4
Canada
Customers are responsible for arranging shipment of the ECU to AMT. Return shipping will follow the shipping method selected with the order.
Step 4 — ECU Programming
Upon receipt, AMT will inspect the ECU identification and confirm programming compatibility.
The ECU will then be programmed with the selected calibration, subject to successful ECU identification and programming checks.
Step 5 — ECU Return and Installation
Once programming is complete, the ECU will be securely packaged and shipped back using the applicable return shipping service.
Have the ECU reinstalled by a qualified technician following the appropriate BMW service procedure.
If you are unsure whether your BMW is equipped with the N20 or B48 engine, please contact AMT Tuning with your VIN and ECU identification information before purchasing.
Email: sales@amttuning.com
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed