AUDI TTRS GPF - 2.5 TFSI (8S MK2) - 400hp - (09/2018-2020) - PERFORMANCE SOFTWARE TUNE

Stage 1 (Reprogrammation)

Consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle response, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable and emission compliant

Stage 2 (Reprogrammation and optimization intake and exhaust)

For those who want a little more than stage 1, we have a stage 2 which consists of optimising a number of elements around the engine to increase the efficiency of the engine. Primarily this is about intake and exhaust. A lot of air-intake systems are very restrictive because of their anti-resonant structure which is intended to damp the intake noise of the engine. By mounting a sports air filter or custom air intake, more airflow to the engine is allowed and we get a nice power gain. As we reach the safety standards of the manufacturer at stage 2, sometimes parts must be strengthened e.g. clutch. Each stage is indicated which parts are replaced.

Stage 3(New motor parts)

At stage 3 we go a step further, we are going to replace the internal or vital parts of the engine or turbocharger, this can go from increasing the cylinder capacity, placing sport camshafts, to the installation of a larger turbocharger. Sometimes there are some inherent risks to reliability, but not always. Manufacturers often build 1 basic engine block and by using a larger turbo and injectors they can build 2 capital versions. It goes without saying that in some cases you can boost your engine with original parts of the heavier version, without affecting the reliability because the manufacturer already had been anticipated.

Chiptuning Gearbox

Chiptuning gearbox software makes it possible to exploit the full potential of your vehicle and to benefit from an optimal driving experience.

• Improved responsiveness
• Optimization of flexibility and driving comfort
• Modified torque limiters
• Harmonization with engine chiptuning
• Elimination of sequential kick-down (When possible)

ECU Tune Features:

Optimized for 91 Octane / 95 Ron gas
Improved Fuel Efficiency
ECU individually reprogrammed
Optimized Responsiveness and Drivability

Best possible performance and results, within the safety margins

100% emissions compliant

HOW DOES IT WORK?

1. CONNECTING TO THE VEHICLE
   • Connect Powergate to your vehicle through the OBD diagnosis port with the supplied cable and wait for the bright LED strip to turn BLUE. Log in to the Powergate App by creating a ALIEN_id profile to use Alientech services.
2. BLUETOOTH PAIRING
   • Connect your smartphone to Powergate via Bluetooth. Just activate it from the icon on your phone’s settings and start searching for available devices to pair. The Powergate’s LED rail will illuminate BLUE.
3. CONNECT TO THE INTERNET
   • Connect both Powergate and your smartphone to the same internet network. If a WI-FI router is not available. You can connect Powergate to your mobile network (Hotspot).
4. CHOICE OF VEHICLE
   • Choose the brand, type of fuel and model of your vehicle from the list of vehicles in the App. Once this operation has been carried out, it is necessary to go into detail and choose the motorization. To make this easier, you can read this information on your vehicle’s registration document.
5. IDENTIFICATION
   • The tuning phase begins. Perform ECU identification. The process may last up to a few minutes during which Powergate will be illuminated in RED.
6. READING
   • Take a ECU reading. This process has a variable time duration that is independent of Powergate. Wait until the end of the operation while the LED guide will be illuminated RED.
7. WRITING
   • At the end of the read process, the control unit has connected to Powergate, and you can write the file Altered. This process has a variable time duration that is independent of Powergate. Stand by without ever unplugging the instrument. When the operation is completed, the LED guide will light up GREEN.

KEY FEATURES

• Extensive vehicle list (+ 18,000 vehicles)
• RFID quick Initialization
• Multi-level customization
• Real-time session monitoring
• Automatic File Pairing
• Cloud Platform
• Precise and accurate customization of your vehicle
• Intuitive User Experience
• Remote Configuration & Customization
• Bluetooth Connectivity & Compact design

• Increased Performance
• Improved Fuel Efficiency
• Custom ecu remapping
• Non-invasive and reversible maps
• Up to 4 customizations of your vehicle
• No PC/Laptop is Required

OBD DB25 Connection

Powergate is compatible with both OBD cables for cars and motorcycles. The OBD cable has been designed in line with the aesthetics of the device to ensure a seamless and pleasant user experience.

Powergate App

The Powergate app is compatible with the most widely used smartphone operating systems: iOS, Android, and EMUI, offering an intuitive tuning experience through vehicle performance customization. Once paired with the smartphone, it allows access to modified files on the Cloud.Furthermore, it’s possible to customize its skin: an effective tool for the Powergate Manager to create a distinctive visual identity, transcending geographical boundaries and differentiating from the competition.

Purple-Wi-Fi Module update