Address
6 - 25 Edilcan Drv, Concord, Ontario L4K 3S4
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed

AMT TUNING LTD
Expert Tuning Services for Optimal Performance
Experience the thrill of enhanced performance with AMT Tuning
Enhanced Speed - Unleash Power - Ultimate Performance
Stage 1 performance software tune (ECU tune) for the Audi S3 8Y 2.0 TFSI (10/2020–2023), 310 HP stock. The ECU is individually reprogrammed. A TCU tune for the 7-speed DSG / S tronic transmission is available as an option, as Stage 1 or Stage 2.
Our AMT performance software is designed to improve engine response, increase usable power throughout the rev range, and enhance drivability while maintaining smooth and reliable operation.
Stage 1 consists of an individual recalibration of the engine management system, including optimization of key parameters such as ignition, fueling, throttle response, torque control and related ECU strategies. All engine parameter values at this stage remain within sensible operating limits for the platform. Stage 1 is designed to improve performance, drivability, and responsiveness while maintaining reliability.
| Tune | Power (HP) | Torque (lb-ft) | Torque (Nm) |
|---|---|---|---|
| Stock | 310 | 295 | 400 |
| Stage 1 ECU | 380 | 368 | 499 |
| Stage 1 ECU + DSG | 400 | 384 | 520 |
| Stage 2 ECU + DSG | 430 | 406 | 550 |
Final gains may vary depending on fuel quality, hardware, ECU software version and vehicle condition.
ECU tune features:
7 speed DSG / S tronic TCU tune. Selectable under Add Transmission Tune in the product options (7 Speed S Tronic - TCU Tune - Stage 1, or 7 Speed S Tronic - TCU Tune - Stage 2).
| TCU tune | ECU tune | Features |
|---|---|---|
| Stage 1 DSG / TCU software | Recommended with Stage 1 and Stage 2 ECU tune | Optimized gearshift speed, torque limiter optimized in each gear, gear display in D and S mode, kickdown removed in sequential mode, increased clutch clamping pressure, increased line pressure, increased torque capacity, increased power handling capability |
| Stage 2 DSG / TCU software | Recommended with Stage 2 ECU tune. Required with Stage 3 ECU tune | Optimized gearshift speed, higher shift points, torque limiter optimized in each gear, gear display in D and S mode, kickdown removed in sequential mode, increased clutch clamping pressure, increased line pressure, increased torque capacity, increased power handling capability |
Selectable in the product options.
Upgrade Tune:
Add Options:
Stage 2 is intended for vehicles equipped with supporting intake and exhaust modifications that improve airflow. The calibration is adjusted to take advantage of the hardware changes and deliver stronger overall performance.
Stage 3 is intended for vehicles equipped with upgraded turbocharger hardware that can support substantially higher airflow and boost levels. Contact AMT for details and recommendations on Stage 3 hardware and tuning options.
Programming options:
Flash your vehicle using the Powergate 4 device and smartphone app. Download the Powergate app, create an ALIEN_id account, and pair your device with your smartphone. An internet connection is required. Device Registration: After receiving your Powergate 4, send AMT a clear photo of the device showing its serial number. AMT will handle the registration and confirm when it is complete. The flashing tool is sold separately from the ECU tune. Compatible tuning files are supplied through AMT's Powergate system.
The Powergate 4 lets the customer flash the vehicle through the OBD port with a smartphone app and gives access to tuning where supported.
If you are unable to bring the vehicle to AMT, the ECU can be removed and shipped to AMT Tuning for programming. Pack the ECU securely and include a note in the package with the following information:
AMT needs this information to identify the ECU correctly and match it to your order before programming begins.
Packaging: pack the ECU securely in anti-static material and/or bubble wrap. Ship it in a strong padded box with tracking and insurance. Improper packaging may result in damage during transit.
Shipping address: AMT Tuning Ltd, 6-25 Edilcan Drive, Concord, Ontario L4K 3S4, Canada.
Phone: +1 877 469 9440. Email: sales@amttuning.com.
| Specification | Details |
|---|---|
| Production date | 10/2020–2023 |
| Engine | 2.0 TFSI |
| Engine code | CJXB |
| ECU make | Siemens / Continental |
| ECU type | Simos 12 / Simos 18 / Simos 19.6 |
| ECU flashing method | OBD flash / boot mode / bench flash |
| Transmission | Temic DQ381 |
| Time required | 5–6 hours |
Contact AMT before ordering if you would like confirmation for your exact vehicle and ECU version.
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed