Address
6 - 25 Edilcan Drv, Concord, Ontario L4K 3S4
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed
Stage 1 consists of an individual reprogramming of the engine management system of the vehicle, whereby the adjustment of the engine parameters (e.g. ignition, injection, throttle response, torque limiters etc...) are customly adjusted. All engine parameter values at this stage remain within the safety standards prescribed by the manufacturer. Stage 1 is 100% reliable and emission compliant
Stage 2 requires aftermarket parts to enhance the intake and exhaust flow capabilities of the vehicle and provide a less restrictive path. The required parts are cold air intakes, headers (either catless or high flow) and an upgraded exhaust system. The stage 2 tune is reconfigured to account for the improved airflow. Please email or call us for recommendation on part selection!
AVAILABLE FOR BOTH MANUAL & CVT TRANSMISSION / SEDAN & HACHBACK
Features:
* Throttle Response Improved
* Decat (rear O2 delete) included in Stage 2
* Rev Hang Improved
* RPM Limiter @ 7000rpm Stage 1 ( Currently for 6 speed manual only )
* RPM Limiter @ 7200rpm Stage 2 ( Currently for 6 speed manual only )
* RPM Limiter @ 7300rpm Stage 2++ ( Currently for 6 speed manual only )
* Optimized for 91- 93 Octane
* Improved Fuel Efficiency
* ECU individually reprogrammed
* Optimized Responsiveness and Drivability
* Datalog analysis
Available Options
* ** NEW Speed Limiter (Governor) Removal
* ** NEW DTC fault code delete ( OBD Generic P-Codes Required for removal )
* EGR Removal Software ( For GGP EGR Delete Kit )
* EVAP Removal Software ( For Vehicles with EVAP Issues )
* Launch Control Adjustment
* Park / Neutral RPM limiter
* Rear O2 delete software
* Software Available:
1. Stage 1 (89/91 Octane) - Requires K&N Drop in Filter
2. Stage 1 with Pops & Bangs (89/91 Octane) - Requires K&N Drop in Filter & Catback Exhaust
3. Stage 2 (91/93 Octane) - Requires Cold Air Intake & Catback Exhaust
4. Stage 2 with Pops & Bangs (91/93 Octane) - Requires Cold Air Intake & Catback Exhaust
5. Stage 2+ (91/93 Octane) - Requires Cold Air Intake, Catback Exhaust & 2J Headers
6. Stage 2+ with Pops & Bangs (91/93 Octane) - Requires Cold Air Intake, Catback Exhaust & 2J Headers
7. Stage 2++ More Aggressive (93 Octane - 91 SHELL ONLY) - Requires Cold Air Intake, Catback Exhaust & Headers
8. Stage 2++ More Aggressive with Pops & Bangs - (93 Octane - 91 SHELL ONLY) - Requires Cold Air Intake, Catback Exhaust & Headers
Ori. Stage 1 Stage2 Power (HP) 168 186 200 Torque (lb.ft) 155 170 186 Recommended Parts: Headers (for Stage 2)
Required Parts:
Cat-Back Exhaust , Cold Air Intake (for Stage 2)
Production Date | 2019+ |
Engine | 2.0L |
ECU Make | Denso |
ECU Type | R7F701202 |
ECU Type | OBD |
Time Required | 3-4hrs |
Programming Instructions | |
AMTFlasher3+ (Personal Flashing tool, car flashed via OBD port - "NO TUNE INCLUDED IN TOOL" cost of tool is separate to tune) |
YES |
AMTFlasher3+ Personal OBD Programmer is the portable and touchscreen Personal OBD Programmer which will allow you to program the ECUs of your vehicle in complete autonomy, using your preloaded modified maps.
Features
Our business specializes and offers Automotive Performance Tuning on Exotics Cars - Audi, Bentley, BMW, Ferrari, Maserati, McLaren, Lamborghini & Porsche. we offer Automotive Performance Tuning, Automotive Tuning, Performance Tuning, Car Performance Tuning, Custom Tuning, Dyno Tuning, Transmission Performance Tuning
Business Hours
Monday - Friday
9 a.m. - 5 p.m.
Saturday
9 a.m. - 2 p.m.
Sunday
Closed